If your label printer is experiencing issues, a reset can often resolve common problems and restore normal functionality. This guide will walk you through a simple process to reset your printer, ensuring it's ready for use again in just a few steps. Follow the instructions below to get your printer back on track quickly.
📖 Tutorial
How to Reset Label Printer
Step 1: Turn Off the Printer
Begin by turning off your printer. Ensure the power is completely off before proceeding to the next step.
Step 2: Press and Hold Buttons
Simultaneously press and hold the [Feed] and [Pause] buttons on the printer. These buttons are typically located on the front of the printer.
Step 3: Power On the Printer
While holding the [Feed] and [Pause] buttons, turn the printer back on. Continue to hold the buttons as the printer powers up.
Step 4: Wait for the Indicator Lights
Keep holding the buttons until the red light on the printer turns off and the blue light turns on. This may take a few seconds, but it signals that the reset process is underway.
Step 5: Release the Buttons
Once the blue light turns on, release the [Feed] and [Pause] buttons.
Step 6: Restart the Printer and Test Printing
Turn off the printer again and restart it after a few seconds. Once the printer has rebooted, test it by printing a label to ensure it's functioning correctly.