Skip to main content

POS - How to Collect Tips on Card Payments

In this article, you will learn how to collect tips for credit card payment orders.

In this article, you will learn how to collect tips for credit card payment orders. You will learn steps such as how to choose how customers leave tips, collect tips, modify tips, and set up tip percentage shortcut keys.

Table of Contents:

Note:

  • The tip amount entered cannot be lower than $0.50.

  • If tips have been collected and need to be supplemented or refunded, a PIN code with appropriate permissions is required.

  • If a tip is higher than both the amount and percentage limits your store has set, the POS asks you to check it, and an employee with approval permission must enter their PIN before it is submitted. See POS Order - How to Confirm an Over-Limit Tip.

  • After the second tip operation, the tip amount can no longer be changed.

  • Refunding the tip difference will create a refund and mark the order status as partially refunded.

📖 Tutorial

Choose How Customers Leave Tips

For card payments, customers can leave a tip in one of two ways:

  • Tip on Screen: The customer selects a tip on the screen while paying by card.

  • Tip on Receipt: The card is authorized for the order amount first. The POS prints a Check to Sign, the customer writes the tip on it and signs, and staff then enter the tip on the POS.

Set the default method for each device:

  1. On the POS, go to [Settings] - [Payment Settings].

  2. Under Tip Entry Method, choose [Tip on Screen] or [Tip on Receipt] for each service mode (Table Service / Quick Service). The setting is saved right away.

Each device is set separately, and Table Service and Quick Service can use different methods. The new setting applies to orders that haven't started payment yet.

Switch the method for one order:

On the payment page, tap [Tip on Screen] or [Tip on Receipt] next to Full Amount. On Mobile POS, tap the tip method at the top right of the payment page, then choose one in Select Tip Entry Method. The change applies to this order only. The next order uses the device setting again.

Note:

  • Only card payments are affected, including cards entered manually. Cash, gift card, and other payment methods are not.

  • If you leave the payment page without paying, the method goes back to the device setting.

  • The switch is not shown if the device cannot take card payments, or if tips are turned off for Quick Service.

Collect Tips

With Tip on Receipt, the POS prints a Check to Sign after the card is authorized. The customer can select a tip percentage on the receipt and sign it. On Mobile POS, tap [Print Check to Sign] on the payment success screen to print it. The order shows as Authed until the tip is entered.

Click [Update Tips] to view orders eligible for tips. In Table Service mode, you can also click [TBL SVC Orders] to view all table service orders.

Find the order and click [Update/Close Check].

Enter the tip amount, or select a percentage of the order amount, then click [Done] to confirm. Once confirmed, click [Update Close] to finalize the deduction of the tip.

Modify Tips

Tips can be updated a second time. Overpaid amounts will be refunded to the customer's credit card, and underpaid amounts will be collected.

Whether a payment's tip can be changed depends on how it was paid:

  • PAX payments where the customer chose the tip before paying: The tip cannot be changed again from the order details.

  • Other payments that support tip changes: When the time limit and other conditions are met, click [Update] in the order details and enter a PIN with the required permission to change the tip.

To modify tips, find the order that needs to be adjusted and click [Order].

Click [Update] on the pop-up window.

Enter the PIN code with appropriate permissions.

Input the modified tip amount, click [Done] to confirm, then click [Update/Close] to update the tip for a second time.

If the second operation requires a refund to the customer, the order status will change to "Partially Refunded." Each tip change is recorded in the order details, with the amount before and after, who made the change, and when.

Update Tips from the Home Screen

Use [Update Tips] on the POS Home screen to find an order by its number, enter the tip, and move straight on to the next order.

On the POS Home screen, tap [Update Tips].

The list on the left shows orders that can have tips added for the first time. To change a tip that was already entered, search for the order.

To enter a tip:

  1. Under Sequence / Order #, enter the sequence number, the last 4 digits of the order number, or the full 8-digit order number, then tap [Search]. Tap [Clear] to start over.

  2. If one order matches, the tip window opens right away. If several orders match, select the one you want. For orders paid with more than one card, select the payment to tip (for example, Card 1 of 2).

  3. Enter the amount in Tips, or switch to Total to enter the total amount including the tip.

  4. Tap [Update & Next]. A confirmation shows the order number and tip, and the search box clears so you can enter the next order. Tap [Cancel] to close without saving.

Note:

  • Only card, Apple Pay, and Google Pay payments can have tips updated here. Cash, gift card, and points payments are not listed.

  • You can find an order until the end of the next business day. After Close Out Day, its tip can no longer be changed.

  • This uses the same permission as updating tips elsewhere on the POS. No extra setup is needed.

  • The total cannot be less than the order amount.

Set Tip Percentage Shortcut Keys

In the Peblla Store Portal, click [Settings] - [Payment Settings], find the [Tip Settings].

Content Configuration:

① In Tip Calculation, select the tip calculation method.

② Select the service mode to set: [Table Service] or [Quick Service].

③ Input a shortcut key percentage and click [Add tip] to add it.

④ Click [Save] to save and apply settings once configuration is complete.

Did this answer your question?