In this article, you will learn how to install your Peblla K1 Kiosk once it arrives. This step-by-step guide covers everything from unboxing and checking the accessories, to assembling the stand and monitor, threading the cables, connecting the power, and optional camera installation. By the end, you’ll have your K1 Kiosk fully set up, secured, and ready to use.
📖 Tutorial
How to Install the Peblla K1 Kiosk
When you receive your Peblla K1 Kiosk, follow these steps to set it up correctly. Keep the original packaging for at least 1–2 weeks in case you need to return or exchange the product.
Accessories Included
Screws (Bag A: TM415, Bag B: PM48MM, Bag C: M6 Screws & Screw Plugs)
PM4*15 Screws (x2)
Cover plate (x1)
Allen wrench (x1)
Screwdriver (x1)
Power cord (x1)
Adapter (x1)
Anti-slip devices (optional, Bag A or B)
Foot pads (x4)
Installation Steps
Step 1. Unbox the kiosk
Remove the protective foam cover.
Take the monitor and other components out of the box and set aside.
Step 2. Prepare the base and stand
Remove the stand and base from the packaging.
Step 3. Attach the stand
Align the stand with the base bracket as shown.
Connect them with screws in the designated installation holes.
Step 4. Manage the power cord
Thread the power cord through the base and align it with the bottom (left-hand wire exit).
Step 5. Secure the stand
Lock the stand into the base using four screws (Bag A: TM4*15).
Tighten them, starting with diagonal positions for stability.
Step 6. Connect the charging port
Attach the power cord to the charging port inside the stand.
Step 7. Prepare the monitor
Remove the dust cover from the back of the monitor.
Step 8. Mount the monitor
Align the monitor with the pre-installed screws on the VESA mount of the stand.
Fit it into the VESA grooves, then secure it with the provided screws.
Step 9. Tighten connections
Ensure all four VESA screws are tightened.
Connect the power cable to the monitor.
Step 10. Power setup
Plug the power adapter into the base.
Insert the charging cable into the round hole underneath.
Place the back cover plate into position to close the base.
Now your Peblla K1 Kiosk is assembled, powered, and ready for setup. If you have any questions, you are welcomed to contact us at [email protected].